PROJECTS AUSTRALASIA

Typical Lakeside Cooling Towers projects over the recent years.
Victoria University Model	Melbourne MA30
Type	Induced draft counter-flow
Duty	35°C / 29.5° / 22°
Application	Air-conditioning
Material	Fibreglass
Date of Inst.	December 2002
National Foods Ltd Model	Melbourne MA18/3S
Type	Induced draft counterflow
Duty	37°C / 32° / 27°
Application	Specialized Milk Products
Material	304 Stainless body. FRP fandeck/cylinder
Date of Inst.	March 2003
Replacement Reasons	Energy efficiency Maintenance and serviceability Occupational health and safety requirement Mechanical superiority (direct VFD)
Santos Model	Moomba Gas Fields, South Australia 700DF x 3
Type	Cross flow
Duty	53°C / 35° / 22°
Application	Flash Evaporator - Moomba Gasfields - S.A.
Material	Steel Frame - 316 stainless lathes
Date of Inst.	October 2000
Alcoa Model	Wagerup Refinery, Western Australia WM4003S
Type	Counterflow
Duty	50°C / 32° / 24°
Application	Heat Exchanger - Wagerup Refinery - W.A.
Material	Timber
Date of Inst.	September 1996
Data-Air Model	Lonsdale St., Melbourne MA 18/6
Type	Counterflow
Duty	36°C / 29° / 22°
Application	Air-conditioning at Lonsdale St Melbourne
Material	FRP
Date of Inst.	October 2000
Comalco Model	Boyne Island, Queensland 2DF1560
Type	Cross flow
Duty	40°C / 33° / 26°
Application	Boyne Island Aluminium Smelter - QLD.
Material	Timber
Date of Inst.	June/July 1996
Stericlean Linen Service Model	Austin Hospital, Melbourne MA 18/9
Type	Counterflow
Duty	36°C / 28° / 21°
Application	Austin Hospital / Laundry Waste Cooling
Material	FRP
Date of Inst.	July 1999
Olympic Dam Exp. Project Model	Roxby Downs, South Australia DF 1560
Type	Crossflow
Duty	56°C / 34° / 29.5°
Application	Copper and Uranium Mining - Roxby Downs - S.A.
Material	Timber
Date of Inst.	July 1999
AMRL Model	Melbourne WM4002S
Type	Counterflow
Duty	39°C / 29.5° / 21°
Application	Wind Tunnel Project - Melbourne
Material	Timber
Date of Inst.	November 1996
Comalco Model	Bell Bay, Tasmania 2VDA 207812 - Refurbishment (installed 1972)
Type	Crossflow
Application	Aluminium Smelting
Material	Timber
Date of Refurbishment.	November 1994
Rendertech Ltd Model	Pakenham, Victoria RCF 500
Type	Counterflow
Duty	45°C / 28° / 22°
Application	Meat Processing Plant - Pakenham
Material	FRP
Date of Inst.	July 1997
Australian Char Model	Morwell, Victoria, Australia VDA 10587
Type	Crossflow
Duty	55°C / 35° / 22°
Application	Char Plant - Morwell
Material	Timber frame / FRP casing / Stainless lathes
Date of Inst.	June 1998
World Oasis Model	Singapore MA30/3
Type	Counterflow
Duty	62°C / 40° / 27°
Application	Special High-Efficiency Waste Recovery System - Singapore
Material	FRP
Date of Inst.	May 2001
Apex Fenner Model	Melbourne, Australia MA18/6
Type	Induced draft counter-flow
Duty	35°C / 29.5° / 22°
Application	Rubber extrusion
Material	Fiberglass
Date of Inst.	August 2004
Goodyear Belting Model	Melbourne, Australia MA24/9
Type	Induced draft counter-flow
Duty	35°C / 29.5° / 22°
Application	Rubber extrusion
Material	Fiberglass
Date of Inst.	October 2003
Tridonic Atco Model	Melbourne, Australia MA18/6
Type	Induced draft counter-flow
Duty	32°C / 27° / 22°
Application	Copper Wire Manufacturing
Material	Fiberglass
Date of Inst.	December 2005
Bulloo Shire Council Model	Thargomindah, Queensland 2MA40/6
Type	Induced draft counter-flow
Duty	40°C / 25° / 22°
Application	Bore Water Cooling
Material	Fiberglass
Date of Inst.	July 2006

Return to main Clients page - Go to Clients MENA

What did our clients need?
A solution which was economically sound, a design which met with their application and site requirements, project support which acknowledged the strengths of their in-house expertise.

What we provided for them.
We provided our expertise through diagnosis and evaluation, designing solutions for their cooling tower application.

Our track record speaks for itself.

We have provided many turnkey operations, including:

Cooling Tower Manufacturing (Custom)

Plant Equipment design

Pump sizing & selection

Plumbing installation

Light engineering

What distinguishes our assembly process?
Lakeside’s unique design features, incorporated in all it’s towers, allow assembly and installation of all equipment quickly and efficiently, ensuring clients lose as little operational time as possible. The MA range, in particular, normally requires site assembly time of between 4 hours and one day.

VDA/DF installation at the Olympic Dam	Vinidex Plastics, Victoria

Lakeside Cooling Towers manufactures to ISO 9001 standards enabling us to control each project, maintain good communication with the client and never loose sight of their needs.

Lakeside Cooling Towers (Australasia) Pty Ltd
3/198 Whitehorse Rd
Blackburn VIC 3130
Australia
Telephone:+61 03 9877 5066
Facsimile:+61 03 9877 5177
Email: info@lakesidect.com.au